Products: One Hardware Family, Pond to Cloud
TAYKEE (Kantangren) is a smart aquaculture monitoring and automatic aeration control system for fish, shrimp and crab pond farms. The matrix is organized in layers: the sensing layer keeps DO measurement accurate, the control layer executes decisions at the pond, the power layer keeps aerators running through outages, and the platform layer delivers remote management and subscription services.
The stack at a glance
- Sensing — Y504-A fluorescence DO probe: membrane-free, electrolyte-free, IP68 titanium body, RS485 Modbus straight into the controller;
- Control — TK-4G-GW 4G gateway + TK-R12 12-channel board: edge DO closed-loop decisions; sensors, aerators and VFDs on one data bus;
- Execution — waterproof VFD: four-step DO-to-frequency mapping, aerate on demand instead of running flat-out;
- Power — DC48V system-level architecture with modular storage: R40KL rack 40kWh / S40K cabinet 60kWh, sub-100ms off-grid switchover for storm-night outages;
- Platform — TAYKEE cloud: multi-pond dashboard, history, graded alarms, remote diagnostics, OTA, subscription management.
Product list
| Product | Model | One-liner | Details |
|---|---|---|---|
| Fluorescence DO probe | Y504-A | Low-maintenance online dissolved oxygen measurement | View |
| 4G aquaculture gateway | TK-4G-GW | Edge decision core: 4G + dual RS485 + local DO loop | View |
| 12-channel control board | TK-R12-SC4S-BG | 3-phase U/V/W × 4 channels, 380V/220V ready | View |
| Waterproof VFD | VFD | DO-based four-step speed control | Home section |
| Rack energy storage | R40KL · 40.96kWh | 51.2V DC, 48V-bus compatible, 19-inch rack | View |
| Outdoor storage cabinet | S40K · 61.44kWh | IP55, >6000 cycles, plug-and-expand | View |
| 4-in-1 water quality sensor | TK.AS.4in1 | pH / temp / TDS / EC, fresh water, Wi-Fi | Home section |
| 8-in-1 water quality sensor | TK.AS.8in1 | Adds ORP / SG / salinity, sea & brackish capable | Home section |
| TAYKEE cloud platform | — | Multi-pond subscription, graded alarms, OTA | View |
How to size a system
Three steps: ① fix monitoring parameters (DO is mandatory; shrimp ponds usually add pH/temperature); ② fix control capacity (aerators per pond × supply type 380V/220V); ③ fix power tier (stable grid → base tier; storm-prone or unstable grid → DC48V storage tier). Final configuration and pricing follow an on-site survey.
- Single pond / starter farm: gateway + DO probe + control board gives 24/7 monitoring, low-oxygen alarms and automatic aeration;
- Standard multi-pond farm (~2 ha): cascaded gateways + 12-channel boards + waterproof VFDs, managed as one fleet;
- Large or high-value farms (6.7 ha+): add DC48V storage microgrid + Aqua Sensor arrays + TAYKEE cloud subscription and SLA operations.
FAQ
- Do I have to buy the whole stack?
- No. Sensing, control, execution and power layers compose freely. The minimum unit is gateway + DO probe + control board; aerator channels, VFDs and storage can be added later — hardware stays, firmware upgrades via OTA.
- Does it work on both 380V three-phase and 220V single-phase ponds?
- Yes. The TK-R12 board is built as three-phase U/V/W × 4 channels and is common to 380V and 220V ponds; its main-control supply derives two phases from 380V, covering the frequent no-neutral wiring at farm sites.
- How much does a system cost?
- Pricing combines hardware + installation + per-pond subscription and depends on pond area, aerator count and supply type. Contact us for a configuration estimate.
Not sure which pieces your farm needs?
Get a free pond assessment
Get a free pond assessment